How it Works

UPSHELF® install or removal: 
 

First time hub installation: 1 minute with any screwdriver.
For repeated use: in most applications, the hub can remain attached to the pole.

STEP 1: Attach hub halves to pole at location desired for UPSHELF®. Use corner grooves for square poles, and spacer for thinner poles, if necessary. Tighten evenly and FIRMLY.

Step 1

STEP 2: Place UPSHELF® around pole above hub and clasp the two halves together as shown. Take care to keep fingers clear of closure area. The integral latch will click when engaged.

Step 2

STEP 3: Lower the UPSHELF® onto the hub. Turn clockwise until resting flat on hub.

 

Step 3

STEP 4: Hold UPSHELF® close to pole and turn clockwise to firmly engage hub. It may be necessary to hold hub from below if pole turns.

 

Step 4

 TO REMOVE: Empty UPSHELF® of any contents, and reverse install steps: Turn UPSHELF® counter-clockwise to disengage from the hub. Then press integral latch as shown to separate shelf halves. For repeated use in most applications, the hub can remain attached to the pole.

Removal